English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    Accesory [9-10928]
    Accesory
    Ref.: 9-10928
    Built-in capillary type sampling point, with T union for tubes of 27mm. Lenght: 1 meter.
    V.A.T. included
    Consult
    Accesory [9-10931]
    Accesory
    Ref.: 9-10931
    Pipe adapter from 25 to 27mm. Red color. Female-Female type.
    V.A.T. included
    Consult
    Accesory [9-10936-25]
    Accesory
    Ref.: 9-10936-25
    Safety clip for tube with base, Wall or ceiling mounting.
    V.A.T. included
    Consult
    Accesory [9-10946]
    Accesory
    Ref.: 9-10946
    Pipe adapter from 25 to 27mm. Red color. Female-male type.
    V.A.T. included
    Consult
    Accesory [9-10952]
    Accesory
    Ref.: 9-10952
    Pipe adapter from 25 to 27mm. Red color. Female-male type.
    V.A.T. included
    Consult
    Accesory [9-10954-25]
    Accesory
    Ref.: 9-10954-25
    Tube safety clip. Wall or ceiling mounting.
    V.A.T. included
    Consult
    Accesory [9-10960]
    Accesory
    Ref.: 9-10960
    Stickers to mark the sampling hole. Roll of 100 stickers.
    V.A.T. included
    Consult
    Accesory [9-10961]
    Accesory
    Ref.: 9-10961
    Pipe cutting tool.
    V.A.T. included
    Consult
    Accesory [9-10965]
    Accesory
    Ref.: 9-10965
    Reducing sleeve to connect tubes of 25mm at LaserSense aspiration input.
    V.A.T. included
    Consult
    Accesory [9-30422]
    Accesory
    Ref.: 9-30422
    Air heater for LaserSense® aspiration devices.
    V.A.T. included
    Consult
    Accesory [9-30436]
    Accesory
    Ref.: 9-30436
    Inputs/Outputs expansion card for LaserSense® 25/100 aspirating detectors. 5 Outputs (4 alarm and fault levels). 3 programmable inputs.
    V.A.T. included
    Consult
    Accesory [9-30720]
    Accesory
    Ref.: 9-30720
    RS485 Communication card for LaserSense® Nano.
    V.A.T. included
    Consult
    Accessory for HONEYWELL™ B501AP Bases White [BA1AP]
    Accessory for HONEYWELL™ B501AP Bases White
    Ref.: BA1AP
    Adapter accessory of B501AP base for 18 and 20 mm outer diameter pipes. Requires B501AP base.
    V.A.T. included
    Consult
    Accessory for NOTIFIER® B501AP-IV Base Ivory Color [BA1AP-IV]
    Accessory for NOTIFIER® B501AP-IV Base Ivory Color
    Ref.: BA1AP-IV
    Requires a B501AP-IV base. Adapter accessory of B501AP-IV base for 18-20 outer diameter pipes.
    V.A.T. included
    Consult
    Accessory of Surface Mounting for KILSEN® Bases KZ700 and KZ705 Series [S700]
    Accessory of Surface Mounting for KILSEN® Bases KZ700 and KZ705 Series
    Ref.: S700
    Pipe mounting supplement, for all KL700 and KL700A range detector. Facilitates the installation allowing the input of up to four pipes of 20mm maximum. ABS Material in white color.
    V.A.T. included
    Consult
    Accessory [9-10954-100]
    Accessory
    Ref.: 9-10954-100
    Clamping clamp for pipe. Mounting for ceiling or wall. 100 units.
    V.A.T. included
    Consult
    Accessory [9-10973-25]
    Accessory
    Ref.: 9-10973-25
    6 mm connecting nut. 25 units.
    V.A.T. included
    Consult
    Accessory [9-10974]
    Accessory
    Ref.: 9-10974
    Condensation channel.
    V.A.T. included
    Consult
    Accessory [9-10975]
    Accessory
    Ref.: 9-10975
    Intumescent pipe collar for fire sectors. 25-32 mm.
    V.A.T. included
    Consult
    Accessory [9-10976]
    Accessory
    Ref.: 9-10976
    Drift valve for maintenance tasks.
    V.A.T. included
    Consult
    Accessory [9-10978]
    Accessory
    Ref.: 9-10978
    Check valve for maintenance tasks. 3/4 ".
    V.A.T. included
    Consult
    Accessory [9-10980]
    Accessory
    Ref.: 9-10980
    Detector disconnect valve for maintenance tasks. 3/4 ".
    V.A.T. included
    Consult
    Accessory [9-30051]
    Accessory
    Ref.: 9-30051
    Test tool for smoke detection equipment by aspiration.
    V.A.T. included
    Consult
    ACP® 1MPx 4.2mm with IR 10m IP Minidome [ZKMD532]
    ACP® 1MPx 4.2mm with IR 10m IP Minidome
    Ref.: ZKMD532
    "It has a 1/4 ""Progressive Scan CMOS image sensor. Maximum resolution of 1 Megapixel (1280 × 720). H.264 and MJPEG image compression format. Fixed optics of 4.2 mm, with a diagonal field of view 60º 1 infrared LED that automatically activates, thus providing a clear image at 0 Lux (total darkness) at a maximum distance of 10 meters It has an automatic IR CUT filter that allows you to obtain an image with clear and true colors during the day. It has an RJ45 network output that allows powerful remote access by browser (multiplatform), by software or free smartphone application. Supports Dual Stream, which allows fast and fluid access through the Internet. DDNS provided by the manufacturer will allow you to easily remote access even with dynamic IP Compatible with ONVIF standard."
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved