English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    PULSAR® Casing for LCD/B SATEL/W [AWO360]
    PULSAR® Casing for LCD/B SATEL/W
    Ref.: AWO360
    Intended use: SATEL, PARADOX, GALAXY, VISONIC, PYRONIX, CADDX NETWORX, ROKONET, ELKRON, ADEMCO, PIMA, FBII. External dimensions of the enclosure: W=215, H=149, D=50 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LCD/B-SATEL Alarm Keypads [AWO353]
    PULSAR® Casing for LCD/B-SATEL Alarm Keypads
    Ref.: AWO353
    Intended use: SATEL, PARADOX, GALAXY, VISONIC, PYRONIX, CADD NETWORX, ROKONET, ELKRON, ADEMCO, PIMA. External dimensions of the enclosure: W=215, H=150, D=50 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LCD/B/F Alarm Keypads (Flush Type) [AWO356]
    PULSAR® Casing for LCD/B/F Alarm Keypads (Flush Type)
    Ref.: AWO356
    Intended use: DSC, FBII, SCANTRONIC,ROKONET, PARADOX, NAPCO, SATEL, CADDX NETWORX, GALAXY, VISONIC, PYRONIX, ELKRON, ADEMCO, PIMA, SUMMIT. External dimensions of the enclosure: W=250, H=162, D=61 [+/- 2mm]. External dimensions of the flange: W1=276, H1=193 [+/-2 mm]. Tamper protection: tamper – opening of the enclosure. Notes: flush mounted enclosure, locking - lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LED/B Alarm Keypads [AWO350]
    PULSAR® Casing for LED/B Alarm Keypads
    Ref.: AWO350
    Intended use: DSC, FBII, SCANTRONIC, ROKONET, PARADOX, NAPCO, SUMMIT. External dimensions of the enclosure: W=192, H=132, D=42 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LED/B-M Alarm Keypads [AWO359]
    PULSAR® Casing for LED/B-M Alarm Keypads
    Ref.: AWO359
    Intended use: SATEL, PARADOX, PYRONIX. External dimensions of the enclosure: W=140, H=135, D=42 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LED/B-SATEL Alarm Keypads [AWO352]
    PULSAR® Casing for LED/B-SATEL Alarm Keypads
    Ref.: AWO352
    Intended use: SATEL. External dimensions of the enclosure: W=211, H=110, D=42 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Casing for LED/B-SIN Alarm Keypads [AWO363]
    PULSAR® Casing for LED/B-SIN Alarm Keypads
    Ref.: AWO363
    Intended use: INTERLOGIX, SINTONY, CADDX NETWORX, GALAXY, PARADOX. External dimensions of the enclosure: W=169, H=190, D=50 [+/- 2mm]. Tamper protection: tamper – opening of the enclosure. Notes: surface mounted enclosure, locking – lock assembly.
    V.A.T. included
    Consult
    PULSAR® Crosier Anchor Support [OZB1]
    PULSAR® Crosier Anchor Support
    Ref.: OZB1
    Size: 152x112 mm.
    V.A.T. included
    Consult
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Input/Output) [DC/DC05-J]
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Input/Output)
    Ref.: DC/DC05-J
    The converter is designed to supply devices requiring stabilized voltage of 12VDC. The maximum load current is 0.5Amp (Pmax= 6W). Power supply: 12÷30VDC. Power supply output: 0.5Amp/12VDC. Efficiency: 86%. Protections: against reverse input voltage polarity. Dimensions: 50 x 20 x 18 mm. Length of DC input cable: 0.13m + JACK socket 5.5mm/2.1mm male. Length of DC output cable: 0.13m + plug JACK 5.5mm/2.1mm female.
    V.A.T. included
    Consult
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Output) [DC/DC05]
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Output)
    Ref.: DC/DC05
    The converter is designed to supply devices requiring stabilized voltage of 12V DC. The maximum load current is 0.5Amp (Pmax= 6W). Power supply: 12÷30VDC. Power supply output: 0.5Amp/12VDC. Efficiency: 86%. Protections: against reverse input voltage polarity. Dimensions: 50 x 20 x 18 mm. Length of DC input cable: 0.13m + screw connection ?0,51÷1,15 (AWG 24-17), 0,2÷1mm2. Length of DC output cable: 0.13m + plug JACK 5.5mm/2.1mm female.
    V.A.T. included
    Consult
    PULSAR® DC/DC 1.5Amp (12VDC) Power Converter/Reducer (Jack Output) [DCDC15H]
    PULSAR® DC/DC 1.5Amp (12VDC) Power Converter/Reducer (Jack Output)
    Ref.: DCDC15H
    The DC/DC converter is used for powering devices that require stabilized voltage of 12 VDC. The maximum current load is 1.5Amp (Pmax= 18W). 12V/1.5A/62MM DC/DC converter. Power supply: 18÷40VDC. Power supply output: 1.5A/12VDC. Efficiency: 86%. Protections: against short circuit protection. Overload protection. Against reverse input voltage polarity. IP67 plastic enclosure. for flush or surface mounted junction boxes: Ø80. Dimensions: 58 x 58 x 28 mm.
    V.A.T. included
    Consult
    PULSAR® DC/DC 1Amp (12VDC) Power Converter/Reducer (Jack Output) [DCDC10H]
    PULSAR® DC/DC 1Amp (12VDC) Power Converter/Reducer (Jack Output)
    Ref.: DCDC10H
    The DC/DC converter is used for powering devices that require stabilized voltage of 12 VDC. The maximum current load is 1Amp (Pmax= 12W). 12V/1A/55MM DC/DC converter. Power supply: 18÷40VDC. Power supply output: 1A/12VDC. Efficiency: 87%. Protections: against short circuit protection. Overload protection. Against reverse input voltage polarity. IP67 plastic enclosure. for flush or surface mounted junction boxes: Ø60. Dimensions: 50 x 48 x 25 mm.
    V.A.T. included
    Consult
    PULSAR® DC/DC 1Amp (12VDC) Power Converter/Reducer [DC/DC10SD]
    PULSAR® DC/DC 1Amp (12VDC) Power Converter/Reducer
    Ref.: DC/DC10SD
    The step down converter DC/DC 1Amp (DC/DC10SD) is used for step down the input voltage from the range between 8V÷28VDC to the voltage range of 4.5V÷19VDC at the output, adjusted with a potentiometer. The maximum load current is Imax=1Amp (Pmax=12W). Input voltage: 8V÷28VDC. Voltage adjustment range: 4.5÷19VDC. Output current: 1Amp / 12VDC. Protections: Short-circuit protection, Overload protection, overheating protection. Technical outputs: PSU – converter failure. Dimensions: L=80 W=43 H=27 mm. Installation: a mounting panel with an adhesive tape, mounting screws. Notes: The minimum difference between the input voltage and the output voltage is: 3V.
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (12VDC) Voltage Reducer [RN250]
    PULSAR® DC/DC 2.5Amp (12VDC) Voltage Reducer
    Ref.: RN250
    The RN 12V/2.5Amp (RN250) is intended for lowering and stabilising DC voltage within the range of 9÷14V into the value of 12V. In the case when the output voltage drops below the preset output value, the transistor opens and the reducer conducts without any loss. That enables full use of energy accumulated in the PSU's battery during batter-assisted operation. Voltage: 9V÷14VDC. Output current: 2.5Amp/12VDC. Protections: Overload protection, Short-circuit protection. Dimensions: L=63, W=50, H=45 [+/- 2mm].
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (24VDC) Power Converter/Increaser [DC/DC25SU]
    PULSAR® DC/DC 2.5Amp (24VDC) Power Converter/Increaser
    Ref.: DC/DC25SU
    The DC/DC 2.5Amp (DC/DC25SU) step up converter increasing the input voltage from the range between 9.5V÷16VDC to the voltage range of 18V÷28VDC at the output, adjusted with the VADJ potentiometer. The maximum load current is Imax=2.5Amp (Pmax = 60W). Input voltage: 9.5V÷16VDC. Voltage adjustment range: 18÷28VDC. Output current: 2.5Amp / 24VDC. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=140 W=43 H=45 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (24VDC) Voltage Reducer [RN25024]
    PULSAR® DC/DC 2.5Amp (24VDC) Voltage Reducer
    Ref.: RN25024
    The RN 24V/2.5Amp (RN25024) is intended for lowering and stabilising DC voltage within the range of 24÷28V into the value of 24V (adjustment 22V÷Uin DC). In the case when the output voltage drops below the preset output value, the transistor opens and the reducer conducts without any loss (voltage drop ?U<1%). That enables full use of energy accumulated in the PSU's battery during batter-assisted operation. Voltage: 18V÷28VDC. Output current: 2.5Amp/24VDC. Protections: Overload protection, Short-circuit protection. Dimensions: L=63, W=67, H=42 [+/- 2mm].
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (48VDC) Power Converter/Increaser [DC/DC48250]
    PULSAR® DC/DC 2.5Amp (48VDC) Power Converter/Increaser
    Ref.: DC/DC48250
    The DC/DC 48V/2.5Amp (DC/DC48250) step up converter increasing the input voltage from the range between 9.5V÷28VDC to the voltage range of 48VDC at the output. The maximum load current is Imax=2.5Amp (Pmax = 60W). Input voltage: 9.5V÷28VDC. Output voltage: 48VDC. Output current: 2.5Amp. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=140 W=43 H=45 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 2Amp (12VDC) Power Converter [DC/DC20SE]
    PULSAR® DC/DC 2Amp (12VDC) Power Converter
    Ref.: DC/DC20SE
    The DC/DC 2Amp (DC/DC20SE) voltage-step up / step down converter is used for maintaining a constant output voltage in the range between 5÷15VDC, adjusted with the VADJ potentiometer, regardless of the input voltage fluctuations in the range of 9.5V ÷ 16VDC. When the input voltage at the output is lower than needed, the converter increases it to the set value. When the input voltage at the output is higher than needed, the converter lowers it to the needed value set by the VADJ potentiometer. The maximum load current is Imax=2Amp (Pmax = 24W). Input voltage: 9.5V÷16VDC. Voltage adjustment range: 5÷15VDC. Output current: 2Amp / 12VDC. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=110 W=43 H=27 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 2Amp (12VDC) Power Converter/Reducer [DC/DC20SD]
    PULSAR® DC/DC 2Amp (12VDC) Power Converter/Reducer
    Ref.: DC/DC20SD
    The step down converter DC/DC 2Amp (DC/DC20SD) is used for step down the input voltage from the range between 8V÷28VDC to the voltage range of 4.5V÷19VDC at the output, adjusted with a potentiometer. The maximum load current is Imax=2Amp (Pmax=24W). Input voltage: 8V÷28VDC. Voltage adjustment range: 4.5÷19VDC. Output current: 2Amp / 12VDC. Protections: Short-circuit protection, Overload protection, overheating protection. Technical outputs: PSU – converter failure. Dimensions: L=100 W=43 H=27 mm. Installation: a mounting panel with an adhesive tape, mounting screws. Notes: The minimum difference between the input voltage and the output voltage is: 3V.
    V.A.T. included
    Consult
    PULSAR® DC/DC 52V/1.15A Power Converter for Voltage Increase [DC/DC52115]
    PULSAR® DC/DC 52V/1.15A Power Converter for Voltage Increase
    Ref.: DC/DC52115
    "The DC/DC 52V/1.15A booster module (DC / DC52115) is used to maintain a constant output voltage of 9.5-28 V DC at the 52 V DC voltage at the converter output. The maximum load current is Imax = 1.15 A (Pmax = 60 W). The module does not have galvanic isolation between the input / output (IN-AUX), it operates on the common ""ground"" potential (0V) (the IN- and AUX- terminals are galvanically connected = common terminal)."
    V.A.T. included
    Consult
    PULSAR® DC/DC 52V/2.3A Power Converter for Voltage Increase [DC/DC52230]
    PULSAR® DC/DC 52V/2.3A Power Converter for Voltage Increase
    Ref.: DC/DC52230
    "The DC/DC 52V/2.3A booster module (DC/DC52230) is used to maintain a constant output voltage of 18÷28VDC at the 52 V DC voltage at the converter output. The maximum load current is Imax = 2.3 A (Pmax = 120 W). The module does not have galvanic isolation between the input / output (IN-AUX), it operates on the common ""ground"" potential (0V) (the IN- and AUX- terminals are galvanically connected = common terminal)."
    V.A.T. included
    Consult
    PULSAR® DC/DC 5Amp (12VDC) Power Converter with Isolated I/O [DC/DC50SE-SEP]
    PULSAR® DC/DC 5Amp (12VDC) Power Converter with Isolated I/O
    Ref.: DC/DC50SE-SEP
    The DC/DC 5Amp (DC/DC50SE-SEP) voltage-step up / step down converter is used for maintaining a constant output voltage in the range between 5÷15VDC, adjusted with the VADJ potentiometer, regardless of the input voltage fluctuations in the range of 9.5V ÷ 16VDC. When the input voltage at the output is lower than needed, the converter increases it to the set value. When the input voltage at the output is higher than needed, the converter lowers it to the needed value set by the VADJ potentiometer. The maximum load current is Imax=5Amp (Pmax = 60W). Input voltage: 9.5V÷16VDC. Output voltage: 12VDC / Galvanic isolation: input - output. Output current: 5Amp / 12VDC. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=150 W=50 H=60 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 5Amp (12VDC) Power Converter [DC/DC50SE]
    PULSAR® DC/DC 5Amp (12VDC) Power Converter
    Ref.: DC/DC50SE
    The DC/DC 5Amp (DC/DC50SE) voltage-step up / step down converter is used for maintaining a constant output voltage in the range between 5÷15VDC, adjusted with the VADJ potentiometer, regardless of the input voltage fluctuations in the range of 9.5V ÷ 16VDC. When the input voltage at the output is lower than needed, the converter increases it to the set value. When the input voltage at the output is higher than needed, the converter lowers it to the needed value set by the VADJ potentiometer. The maximum load current is Imax=5Amp (Pmax = 60W). Input voltage: 9.5V÷16VDC. Voltage adjustment range: 5÷15VDC. Output current: 5Amp / 12VDC. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=150 W=50 H=60 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 5Amp (12VDC) Power Converter/Reducer with Isolated I/O [DC/DC50SD-SEP]
    PULSAR® DC/DC 5Amp (12VDC) Power Converter/Reducer with Isolated I/O
    Ref.: DC/DC50SD-SEP
    The DC/DC 5Amp (DC/DC50SD-SEP) buck converter is used to reduce the voltage from 20V ÷ 28V DC at the converter input to 12VDC at the output. The maximum load current is Imax=5Amp (PMAX= 60W). The module is galvanically isolated between the input and output (IN-AUX). Input voltage: 20V÷28VDC. Output voltage: 12VDC / Galvanic isolation: input - output. Output current: 5Amp/12VDC. Protections: OLP, SCP, OVP. Dimensions: L=150 W=54 H=60 [+/- 2mm]. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved