English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    VISONIC™ MCT-302 Wireless Magnetic Contact [0-2286-A]
    VISONIC™ MCT-302 Wireless Magnetic Contact
    Ref.: 0-2286-A
    Fully supervised, PowerCode magnetic contact transmitter. For UL installations, for use with the UL listed control unit, model PowerMax+ only. The transmitter includes a built-in reed switch (that opens upon removal of a magnet placed near it) and an auxiliary hard-wired input, programmable as either N.C. or E.O.L., for use with additional sensors - pushbuttons, detectors, door contacts etc. Each input has a unique 24-bit PowerCode ID, selected in the factory from over 16 million possible code combinations.
    V.A.T. included
    Consult
    VISONIC™ MTC-234 Panic Button - G2 [0-2381-1]
    VISONIC™ MTC-234 Panic Button - G2
    Ref.: 0-2381-1
    KF-234 PG2 is a 4-button, two-way wireless keyfob which arms and disarms the PowerMaster control-panel. It can also be used for emergency signaling, home automation and other remote control applications, providing instant visual verification that the requested command has been successfully executed. Confirms that the system has carried out the user’s command. Compatible with international standards. Prolonged battery life (8 years with typical use). Comfortable, attractive, miniature design. Dimensions: 53.5 x 31.5 x 12.5mm.
    V.A.T. included
    Consult
    VISONIC™ Next Cam PG2 Motion Detector - G2 [0-101861]
    VISONIC™ Next Cam PG2 Motion Detector - G2
    Ref.: 0-101861
    Provides the perfect solution for alarms visual check, day or night. When the alarm system is active, and that PIR sensor dectects a movement, the detector send an alert to the control panel and active the camera. In reviewing the picture in real time, the security staff can check the alarm and act accordingly. The scope of the camera is blowing to PIR coverage, which ensure that there is not "lost" areas when the camera is taking pictures. The capture function begging to record when the alarm is activated. Dimensions: 125 x 63 x 60 mm.
    V.A.T. included
    Consult
    VISONIC™ Next PG2 Motion Detector - G2 [0-101185]
    VISONIC™ Next PG2 Motion Detector - G2
    Ref.: 0-101185
    Wireless bidirectional PIR detector compatible with PowerMaster family. Visonic PowerG technology. Provides extended transmission Range and battery life, benefits for professional installers, central monitoring stations, the same for final users. 15m/90° Covering with protection of areas closed to the wall. The device has a visual indicator of signal quality. Better battery useful life (6 Years with normal use). Large transmittion Range which allows installations without reapeters. Dimensions: 94.5 x 63.5 x 53 mm. Security grade 2 certified.
    V.A.T. included
    Consult
    VISONIC™ Power G Keypad [0-101653]
    VISONIC™ Power G Keypad
    Ref.: 0-101653
    KP-140 PG2 is a portable, wireless, two-way keypad for PowerMaster® systems. It enables easy arming and disarming of the alarm system and initiation of emergency, fire and panic alarms. It also controls programmable outputs (PGM) and X-10 devices from anywhere in the home or office. Two-way communication with the control panel provides homeowners with visual indication of successful command execution and system status.
    V.A.T. included
    Consult
    VISONIC™ SR-740 PG2 Wireless Outdoor Sounder [0-102985]
    VISONIC™ SR-740 PG2 Wireless Outdoor Sounder
    Ref.: 0-102985
    Two-way wireless outdoor sounder (IP55). It provides the perfect security solution for home owners with a PowerMaster system who are looking for an affordable and easy to install outdoor siren. It excels in offering cabling-free installation and optional extended time between battery changes. Prolonged battery life (8 years with typical use). Loud 110db piezo sounder. Differentiated alarm sounds for intrusion, fire, gas and flood. Large print screen area for customizable logos. Dimensions: 295 x 186 x 63mm..
    V.A.T. included
    Consult
    VISTA / Omni / Intellisense Modem [CIA2-EU]
    VISTA / Omni / Intellisense Modem
    Ref.: CIA2-EU
    Modem for remote bidirectional communications and local programming of some controls (see specifications). It works with power 220 V, 50 hz; and it is supplied with a 9 VAC plug-in transformer. Communication speed up to 2400 Baud. It uses a standard RS232 modem cable with a DB25 connector. It has a separate modular telephone jack to connect a local telephone device; interface cable supplied. Dimensions 150 x 160mm x 45 mm. Contains indicators for: CD Detection Carrier (carrier), OH Offline. RX Receive Data. TX Transmit Data. DTR Terminal Data List.
    V.A.T. included
    Consult
    Voltage Distribution Panel 24xS [ARADIN1]
    Voltage Distribution Panel 24xS
    Ref.: ARADIN1
    Voltage distribution panel 24xS. Mounting dimensions: W=19", H=3U. Intended use: the voltage distribution panel is intended for mounting electrical fuses, ‘S’ type, in a RACK 19" cabinet. The enclosure can accommodate max. 24 fuses, 1 S wide.
    V.A.T. included
    Consult
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2 [RF-EV1012PI-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2
    Ref.: RF-EV1012PI-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    Consult
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ - G2 [RF-EV1012-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ - G2
    Ref.: RF-EV1012-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    Consult
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2 [RF-EV1016-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2
    Ref.: RF-EV1016-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 16m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    Consult
    Volumétrico UTC™ PIR Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ - G2 [RF4016I4]
    Volumétrico UTC™ PIR Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ - G2
    Ref.: RF4016I4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    Consult
    VOYAGER™ TCP/IP Transmission Module with PSTN Backup [VOYAGER-PRE/ALG]
    VOYAGER™ TCP/IP Transmission Module with PSTN Backup
    Ref.: VOYAGER-PRE/ALG
    Transmitter TCP/IP over Ethernet networks backed by PSTN. Especially compatible with GALAXY G2 and GY-HOME. Bidirectional TPC/IP core with a built-in serial port. Available the option of direct connection.
    V.A.T. included
    Consult
    VOYAGER™ TCP/IP Universal Transmission Module [VOYAGER-NET]
    VOYAGER™ TCP/IP Universal Transmission Module
    Ref.: VOYAGER-NET
    Transmitter based on the TCP/IP protocol. Supports universal central transmitting in Contact ID formats. Communication via TCP-IP. PSTN communication as backup and/or dual. Bidirectional control with TCP-IP Galaxy, Texecom, Powermax, NetworkX, Aritech and other series. Soft IP support Software Test and CRAW.
    V.A.T. included
    Consult
    VP 231 Protection Visor [360000152150]
    VP 231 Protection Visor
    Ref.: 360000152150
    Catadioptric protection visor.
    V.A.T. included
    Consult
    VRS121000EBS Power Supply for UTC™ IFS® Equipment [VRS121000EBS]
    VRS121000EBS Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EBS
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VRS121000EES Power Supply for UTC™ IFS® Equipment [VRS121000EES]
    VRS121000EES Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EES
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VRS122000EBA Power Supply for UTC™ IFS® Equipment [VRS122000EBA]
    VRS122000EBA Power Supply for UTC™ IFS® Equipment
    Ref.: VRS122000EBA
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VSE Additional High Secure [LC-1000]
    VSE Additional High Secure
    Ref.: LC-1000
    Additional Visual Security Element (VSE) to be added to the Master. The available ones are: 2D and 3D. Pseudo Color Fine lines. Hidden text. Changing Image Micro Text Morphing Nano Text. Ghost image. Indicate in the design (required at 1200 dpi).
    V.A.T. included
    Consult
    VU-1-PP 1 Kg ABC Powder "BV" Fire Extinguisher [01001]
    VU-1-PP 1 Kg ABC Powder "BV" Fire Extinguisher
    Ref.: 01001
    Portable fire extinguisher with 1kg charged. Extinguishing agent: crystalline chemical powder. For class A,B,C fires. With tested efficiency 5A / 21B. Consist of two parts of steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. DC-04 Cold rolled sheet, and united by semiautomatic but weld in atmosphere inert a mix of CO2 gas and argon. RAL 3000 Epoxy paint of 100 micron thick, covered in conservatory after receiving prior treatment with phosphates in degreasing tunnel and deionised water. With brass valve, with intern pressure gauge and intern security valve of pressurized self-test. The model is not provided with hose, but its provided with a duck-billed diffuser. Not requires hose when the extinguishing agent load is <= 5 Kg. Dimensions of 345 mm x ø 80 mm. Maximum operating temperature: - 20 ºC to + 60 ºC. Support included.
    V.A.T. included
    Consult
    VU-10-CO2 10 Kg CO2 "BSI" Fire Extinguisher [01010]
    VU-10-CO2 10 Kg CO2 "BSI" Fire Extinguisher
    Ref.: 01010
    10Kg Portable fire extinguisher (14,93 liters), made in a stretched alloyed steel sheets with 34CrMo4 welding. Extinguishing agent : CO2. with test efficiency of 89B. RAL 300 Epoxy paint of 100 micron thick. With lativan valve, with steel bolt. Hose made in reinforced rubber with connection to the extinguisher. Valve type lever. Maximum operationg temperature: -20 ºC to + 60 ºC. Dimensions: 963 mm x ø 154 mm.
    V.A.T. included
    Consult
    VU-12-PP 12 Kg. ABC Powder "BV" Fire Extinguisher [01012]
    VU-12-PP 12 Kg. ABC Powder "BV" Fire Extinguisher
    Ref.: 01012
    Portable fire extinguisher with 12kg charged. Extinguishing agent: crystalline chemical powder. For class A,B,C fires. With tested efficiency 55A / 233B. Consist of two parts of steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. DC-04 Cold rolled sheet, and united by semiautomatic but weld in atmosphere inert a mix of CO2 gas and argon. RAL 3000 Epoxy paint of 100 micron thick, covered in conservatory after receiving prior treatment with phosphates in degreasing tunnel and deionised water. With brass valve, with intern pressure gauge and intern security valve of pressurized self-test. Hose made in reinforced rubber with connection to the extinguisher and in the outlet a duck-billed diffuser. Dimensions of 635 mm x ø 190 mm. Maximum operating temperature: - 30 ºC to + 60 ºC. Support included.
    V.A.T. included
    Consult
    VU-2-AFFF de Foam Extinguisher of 2 Liters [02002]
    VU-2-AFFF de Foam Extinguisher of 2 Liters
    Ref.: 02002
    2 Liters portable fire extinguisher, two steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. DC-04 cold roll sheet, and united thanks to semiautomatic welding inert atmosphere of a CO2 and Argon mix. Extinguishing agent: Water+ additives 6%. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, with intern pressure gauge and intern security valve for pressurized self-test. Steel bolt. Hose made in reinforced rubber with connection to the extinguisher and output to a special PVC diffuser for water. Maximum operating temperature: 0 ºC to + 60 ºC.
    V.A.T. included
    Consult
    VU-2-CO2 CO2 2 Kg Marine Extinguisher [0220M]
    VU-2-CO2 CO2 2 Kg Marine Extinguisher
    Ref.: 0220M
    2Kg Portable fire extinguisher (3 Liters). Extinguishing agent: CO2. With test efficiency of 34B. Consist of steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, with polypropylene probe tube. bolt steel. Hose made in reinforced rubber with connection to the extinguisher and in the outlet a vase diffuser. Includes steel support. Dimensions: 550 mm x ø 102,50 mm. Maximum operating temperature: - 30 ºC to + 60 ºC.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved